1 2

Professional Use Only

DTM 1300 High Build Primer

DTM 1300 High Build Primer

Color: White

DTM 1300 High Build Primer is a two-part, high build, surface tolerant modified epoxy zinc-phosphate primer. It can be sanded to achieve a smooth surface to be top coated with Precision Coatings PC3 acrylic aliphatic polyurethane or PC5 siloxane for a fine finish. Formulated with low VOC’s and ultra-violet resistant so it can be used under metallic and iridescent finish coats that are translucent.

Surface Types

  • Steel
  • Aluminum
  • Galvanized Steel
  • Concrete & Masonry
  • Gypsum Board
  • Drywall

See the full list and details on the Technical Data Sheet.

Coverage

RECOMMENDED DRY FILM THICKNESS 2.0 mils to 6.0 mils 

THEORETICAL COVERAGE 433 – 144 sq. ft. at recommended DFT (theoretical)

Finish

Available in Black, Grey, and White.

Top Coats

Pot Life

3 hours @ 70°F (21°C)

Dry Time

24 hours @ 70°F (21°C) & 50% RH.

May be recoated after 1 hour. Sanding or light abrasion may be necessary after 72 hours.

See Technical Data Sheet for full details.

What Comes In A Kit?

Part A: 3/4 Gallon

Part B: 1 Quart

View full details

Data Sheets

Request a Quote

Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.

Get Started

Projects

1 3

Additional Information

Surface Preparation

All surfaces must be clean, dry and free of oil, grease, dirt, salt deposits or other contamination and properly abraded

Application

Apply using 40-55 PSI at the gun for siphon and gravity feed spray guns, 10 PSI maximum for HVLP spray guns.

May be brushed or rolled for field service applications. Use a natural bristle brush or 1⁄4 inch to 3⁄4 inch nap, phenolic core roller.

Recommended film thickness is 2.0 to 6.0 mils DFT.

See Technical Data Sheet for full instructions.

Clean Up

Clean all spray equipment immediately after use. Acetone may be used to clean application equipment.

See Technical Data Sheet for details.

You might also be interested in...