DTM 1600 Waterborne Bonding Primer is a single part corrosion resistant, low odor, waterborne polyurethane bonding primer. Precision's DTM 1600 Bonding Primer is ideal for application in facilities that can't fully shut down for maintenance such as resort hotels, restaurants, retail stores, theme parks and health care.
Share
Surface Types
Interior Mild Carbon Steel
Interior Aluminum
Interior Anodized Aluminum
Coatable Fiberglass Composites
Drywall
See the full list and details on the Technical Data Sheet.
Coverage
RECOMMENDED DRY FILM THICKNESS 1.0 mils to 3.0 mils DFT
THEORETICAL COVERAGE 641 – 213 sq ft at recommended DFT (no loss)
Finish
Available in Black, White, or Grey with a Flat finish.
All surfaces must be clean, dry and free of oil, grease, dirt, salt deposits or other contamination and properly abraded.
See Technical Data Sheet for full instructions.
Application
May be applied by brush, roller or spray. If sprayed, apply using 40-55 PSI at the gun for siphon and gravity feed spray guns, 10 PSI maximum for HVLP spray guns.
Recommended film thickness is 1.0 to 3.0 mils DFT.
Clean Up
Clean all spray equipment immediately after use. Acetone may be used to clean application equipment.
