PC3 Solvent-Based Polyurethane is a high cross-link density acrylic polyurethane paint is an extended life-cycle finish with outstanding color and gloss retention. Metallics, iridescent, and solid colors are created with automotive grade pigments to ensure colors will retain their original appearance long after conventional high-performance coatings have faded. The automotive grade pigments are combined with a high cross-link density acrylic polyurethane resin system that provides added resistance to ultra violet radiation, weathering, staining, corrosion, erosion, environmental chemicals, and abrasion.
Share
Surface Types
Steel
Aluminum
Galvanized Steel
Concrete
Masonry
MDF
Drywall
Previously Coated Surfaces
See the full list and details on the Technical Data Sheet.
Coverage
RECOMMENDED DRY FILM THICKNESS 2.0 mils to 3.0 mils
THEORETICAL COVERAGE 609 – 203 sq ft at recommended DFT (no loss)
Finish
Available in solid colors, metallics, and iridescents in gloss, semi-gloss, satin, egg-shell and matte/flat.
Primer
DTM 1300, DTM 1400, and DTM 3000
Pot Life
3 hours @ 70° F (21°C)
Dry Time
Light to moderate pedestrian traffic: 24-48 hours at 70 degrees Fahrenheit.
Clean surface to eliminate all oils, grease, soap films, rust and other contaminates before applying the coating.
Application
PC3 Solvent Based Polyurethane may be applied by spray, roller or brush application. For spray application, apply using 40-55 PSI at the gun for siphon and gravity feed spray guns, 10 PSI max. for HVLP spray guns.
See Technical Data Sheet
Clean Up
Clean all spray equipment immediately after use. Acetone may be used to clean spray equipment.
