PC6 Waterborne Urethane top coat is a high performance pre-reacted, durable, single component waterborne polyurethane. It is very low odor, low VOC, and has been formulated for both interior and exterior application. PC6 provides excellent color and gloss retention, while providing the performance of a two-component polyurethane yet contains no reactive isocyanate. It has good scrub and abrasion resistance so it can be easily cleaned.
Share
Surface Types
Steel
Aluminum
Galvanized Steel
Concrete
Masonry
MDF
Drywall
Previously Coated Surfaces
See the full list and details on the Technical Data Sheet.
Coverage
RECOMMENDED DRY FILM THICKNESS 1.0 mils to 3.0 mils DFT
THEORETICAL COVERAGE 641 – 213 sq. ft. at recommended DFT (no loss)
Finish
Available in Neutral, Light, Deep, Silver Mist, Platinum, and Chrome Silver in Eggshell, Semi-Gloss, and Satin.
Ensure that the substrate is free of grease, dirt, wax, mildew and other contaminates before coating.
See Technical Data Sheet for full details.
Application
PC6 Waterborne Urethane may be applied by spray, roller, or brush application. For spray application, apply using 40-55 PSI at the gun for siphon and gravity feed spray guns, 10 PSI max. for HVLP spray guns.
See Technical Data Sheet for full details.
Clean Up
Clean all tools and spray equipment immediately after use with soap and warm water. Acetone may be used as a final rinse.
