1 2

Professional Use Only

DTM 3000 Fast Dry Polyurethane Primer

DTM 3000 Fast Dry Polyurethane Primer

Color: Black

A fast dry and corrosion resistant aliphatic polyurethane primer/sealer that is ideal for fast turnaround and operational time constraints. DTM 3000 Fast Dry Polyurethane Primer is ultra-violet resistant so it can be used under metallic and iridescent finish coats which are translucent.

Surface Types

  • Steel
  • Aluminum
  • Galvanized Steel
  • Concrete
  • Masonry

See the full list and details on the Technical Data Sheet.

Coverage

RECOMMENDED DRY FILM THICKNESS 2.0 mils to 3.0 mils

THEORETICAL COVERAGE 609 – 203 sq ft at recommended DFT (no loss)

Finish

Available in Black or Grey with a Flat finish.

Top Coats

Pot Life

3 hours @ 70° F, 21° C

Dry Time

Tack Free: 1 Hour

Recoat: May be recoated with itself at any stage. {Scuff sanding or light abrasion may become necessary after 24 hours).

Force Drying: 140°F for 20 minutes. Allow a 10-min. cool down time.

See Technical Data Sheet for full details.

View full details

Data Sheets

Request a Quote

Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.

Get Started

Projects

  • Coming soon...

Additional Information

Surface Preparation

All surfaces must be clean, dry and free of oil, grease, dirt, salt deposits or other contamination and properly abraded.

See Technical Data Sheet for full instructions.

Application

May be applied by brush, roller or spray. If sprayed, apply using 40-55 PSI at the gun for siphon and gravity feed spray guns, 10 PSI maximum for HVLP spray guns. If brushed use a natural bristle brush, or if rolled use 1⁄4 inch to 3⁄4 inch nap, phenolic core roller.

Recommended film thickness is 2.0 to 6.0 mils DFT.

See Technical Data Sheet for full details.

Clean Up

Clean all spray equipment immediately after use. Acetone may be used to clean application equipment.

See Technical Data Sheet for full instructions.

You may also be interested in...